Basement Watchdog 1-HP 115-Volt 94-GPM Stainless Steel Submersible Sump Pump
The Basement Watchdog 1 HP submersible sump pump features a powerful and energy efficient permanent split capacitor (PSC) motor providing 4,400 GPH output at 10 ft. lift (6,540 GPH at 0 ft. lift). The cast iron/stainless steel construction along with dual ball bearings and dual shaft seals protect the motor for years of service. The caged Dual Float Switch and Controller will automatically activate the pump when rising water lifts either float by 1/4 in. Once the float drops to the original position, the controller will keep the pump running for an additional 10 seconds to completely drain the sump pit. The protective float switch cage prevents debris or other wires from interfering with the floats. The vented and curved bottom prevents debris from building up under the primary float. The float switch is easy to install and can be adjusted to any level.
The Basement Watchdog 1 HP submersible sump pump features a powerful and energy efficient permanent split capacitor (PSC) motor providing 4,400 GPH output at 10 ft. lift (6,540 GPH at 0 ft. lift). The cast iron/stainless steel construction along with dual ball bearings and dual shaft seals protect the motor for years of service. The caged Dual Float Switch and Controller will automatically activate the pump when rising water lifts either float by 1/4 in. Once the float drops to the original position, the controller will keep the pump running for an additional 10 seconds to completely drain the sump pit. The protective float switch cage prevents debris or other wires from interfering with the floats. The vented and curved bottom prevents debris from building up under the primary float. The float switch is easy to install and can be adjusted to any level.
- Pumps 4,400 GPH at 10 ft lift, emptying the sump pit quickly (6,540 GPH at 0 ft lift)
- 1 HP, 6.3 Amp permanent split-capacitor motor with dual motor-protecting seals provides optimal GPH output
- Upper and lower ball bearings and thermally protected, water-cooled design for improved efficiency
- Cast-iron/stainless steel construction provides durability for long-lasting use
- Includes 10 ft. power cord for easy installation
- Stainless steel fasteners will not corrode
- Includes caged dual micro reed float switch
- 3-Year limited warranty
General
- Battery Voltage: N/A
- Collection Name: N/A
- Sub Type: Submersible sump pump
- Type: Sump pumps
Dimensions
- Cord Length (Feet): 10
- Inlet Diameter: 2-in
- Outlet Diameter: 2-in
Features
- Alarm Included: No
- Amperage: 6.3
- Application: Sump pump
- Battery Backup: No
- Check Valve: No
- Gallons per Minute (Gallons): 94
- Impeller Material: Cast iron
- Inlet Connection: N/A
- Material: Stainless steel
- Maximum PSI: 0
- Outlet Connection: NPT
- Package Contents: Pump, dual float switch with protective cage, controller
- Package Quantity: 1
- Power Source: Electric
- Pump Horsepower: 1-HP
- Submersible: Yes
- Switch Type: Specialty
- Vertical Lift: 22-ft
- Volts: 115
- Water Flow (GPM): 109
Warranty
- Warranty: 3-year limited
Certifications
- CA Residents: Prop 65 Warning(s): No
- Safety Listing: CSA safety listing