BRK Hard-Wired w/Battery Back-Up Electrochemical/Ionization Smoke and Carbon Monoxide Detector 6 pk

The BRK Brands, Inc. model SC9120B is a wire-in, 120V AC 60Hz single and/or multiple station smoke and CO alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101. The SC9120B complies with UL217, UL2034, CSFM, NFPA 72, NFPA 720, HUD, FHA and other agencies that model their codes after the above agencies. They meet building codes where AC/DC with Silence smoke and CO alarms are required either separately or in combination. The alarms are interconnectable with up to 18 devices, of which 12 can be smoke alarms. The BRK SC9120B alarm features a dual ionization smoke sensing chamber and an electrochemical carbon monoxide sensor, an 85dB horn and a “silence” feature. “Intelligent Sensing Technology” system is designed to reduce nuisance alarms. “Latching alarm Indication” remembers which unit initiated an alarm. When interconnected in a series, the unit that triggered the alarm rapidly flashes its red LED indicator. After the alarm condition subsides, the initiating unit will store in memory or “latch” the information and begin to flash the LED indicator 2 seconds on, 2 seconds off. The “perfect mount” system features a gasketless base and a mounting bracket that keeps the alarm secure over a wide rotation range to allow for true alignment. Other Contractor preferred features include a dust cover to keep alarm clean during construction, keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a “quick-connect” wiring harness. Installation is quick, easy and cost effective. An ionization smoke sensing chamber and an electrochemical CO sensor both with a 10 year service life. Powered by 120V AC, 60Hz and have a monitored 9V battery backup and a solid sta

• The unit shall perform self diagnostic tests and issue a malfunction warning (three chirps) if the unit malfunctions
• The unit shall have an “end of life” signal (5 chirps), this signal should be capable of temporarily being silenced for up to 2 days, after about 2 days, the signal will resume
• A visual power-on indicator to confirm unit is receiving AC power or has switched to battery backup mode, separate LED ‘s to indicate a smoke or CO alarm
• The CO sensor is adjusted not to detect CO levels below 30 PPM and will not alarm when exposed to constant levels of 30 PPM for 30 days
• If local codes do not permit, be sure the neutral wire is common to both phases
• Perfect mount allows for easy alignment of alarm
• Perfect for legislation applications
• Tamper resistant
• Saves time/less waste – no individual cartons to open or discard
• Brand Name: BRK
• Batteries Included: Yes
• Brand Name: BRK
• Low Battery Indicator: Yes
• Number in Package: 6 pack
• Packaging Type: Boxed
• Power Type: Hard-Wired w/Battery Back-Up
• Sensor Type: Electrochemical/Ionization
• Test and or Reset Button: Yes
• UL Listed: Yes